Repeater AX1800
All questions
Settings and features
How do I activate the WPS?
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Culpa enim esse excepturi nemo nesciunt officia officiis optio.
How do I connect to the WPS?
1Press the WPS button of the repeater
To activate the WPS, press the button located on the left side of your repeater from approximately 5 seconds (until the WPS LED is flashing).
2Press the WPS Button of your router
Press the WPS of your Internet box/router so that the repeater connects to it. Usually the WPS
button is indicated by two arrows.
How do I set a static IP for my repeater?
1Connect to the Web UI
Follow this procedure to connect to the Web UI.
2System Status
In the System Status screen, click the more details button in the LAN Section.
3Static IP
Click Settings and the Static Address toggle. Then, Enter the following information before clicking Save & Apply:
- IP Address: Enter the IP Address for the repeater.
- Subnet Mask: Select the subnet mask in the list
- Default Gateway: Enter the IP Address of your repeater
- Preferred DNS: You can enter the same value as the previous field.
Warning: Write down the new IP Address of your network. You will use it to connect to the Web UI from now on.
I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater?
I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater,
It is not possible to extend two Wi-Fi Network. You can extend either your Guest Network or your main Wi-Fi Network.
Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?
No. Wi-Fi devices that are connected to the repeater communicate to your modem/router by
using the MAC addresses of the repeater.