ATRIA Wi-Fi 5 Mesh System 2100 UK (3-pack)
All questions
ATRIA Wi-Fi 5 Mesh System 2100 UK (3-pack)
Wi-Fi and network troubleshooting
I cannot access the internet after configuring my Mesh network, why?
There are several reasons why you cannot access internet after configuring your Mesh Network:
- The RJ45 cable is not properly connected to the internet box or the main Mesh or in the wrong port.
- The internet connexion from the internet box is not working properly.
- The main Mesh did not succeed to retrieve the network informations of the internet box.
- The Mesh units are not paired together.
Can I connect my mesh nodes via the Ethernet cable?
Yes, it is possible to connect your Mesh nodes via a Ethernet cable (RJ45). Any device can be connected via RJ45 to any Mesh unit of your Mesh network.
Warning: The main Mesh must be connected to the internet box of your service provider via an RJ45 cable.
How can I add new Mesh units to the existing network I just configured?
It is very easy to add new mesh units to your existing Mesh network.
1Case 1: WPS button
To do so, press the WPS button for 5 seconds on the Mesh unit that is connected to your
router/modem by RJ45.

2WPS of the second device
Then, press the WPS button on the new unit for 5 seconds.

1Case 2 : Atria Mesh App
You can also add a Mesh node through the Atria Mesh App.
To do so, connect to the Wi-Fi of the Mesh device that is connected to your router/modem.

2Atria Mesh App
Then download the Atria Mesh app.

3Credentials
Enter the username and password (admin/admin) to connect.

4Add a New Mesh
Click Add a New Mesh Node.

5QR code
Scan the QR Code located on the rear side of the mesh that you want to add.

How can I have 2 different Wi-Fi Network with my Mesh?
You have different options to have several Wi-Fi Networks with your mesh units:
- You can set up your mesh unit as access points instead of mesh nodes.
- You can deactivate the band steering option of your device that creates a single Wi-Fi Network for the 2.4G or 5G bands.
- You can also configure a guest network.
We advise you to set up a guest network if you need to have several Wi-Fi networks at home.
How can I identify the IP addresses of the different Mesh units of my Network?
To identify the IP addresses of the mesh units that are part of you network.
1Atria Mesh App
Download the application for smartphone 'ATRIA MESH' on the App Store or the Google Play Store.

2Connexion to the Wi-Fi
Connect to the Wi-Fi of your mesh unit.

3Credentials
Then you need to be connected to the Wi-Fi of the Mesh with your smartphone and then login to the app with your credentials that should be 'admin' and 'admin' if you have not changed it.

4My Network
Click My Network.

5Name of the Mesh
Click the Name of the Mesh Agent in the list.

6IP Address
Identify its IP Address.

7Write down the new information
Write down the IP Address.

How can I pair my mesh nodes if they are connected to my internet gateway via Ethernet cables?
1Main Mesh
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.

2Second Mesh unit
You must plug in the second mesh unit too turn it on and then connect it to the main mesh unit (LAN port) by using a RJ45 cable.

3LED
Wait a few minutes for both mesh units to detect the Internet configuration. Once the LEDs are blue on both devices, they are configured.

Warning: You must remove the RJ45 cable from the seconds mesh unit and unplug it to install it in the room where you want to use it.
How do I configure my Wi-Fi mesh network
To configure your Mesh network please refer to the QIG provided in the box of your product.
1CASE 1: Using the WPS Button
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.

2Wait for the configuration
Then, you must wait for a few minutes for the device to configure itself.

3Second Mesh unit
You must plugin the second mesh unit.

4LED
Press the WPS button for at least 4 seconds on the Mesh unit that is connected to your modem/router.
The LED will blink in blue after activating the WPS.

5WPS second Mesh
Press the WPS button for at least 4 seconds on the second Mesh unit.

6LED pairing
When the devices are being paired the LED is bliking in blue. please wait a few minutes for the pairing process to complete.
Once, the devices are paired, the LEDs are blue on both devices.

1CASE 2: Using Ethernet Cable
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.

2Plug the second Mesh to the main Mesh
You must plug in the second mesh unit to turn it on and then connect it to the main mesh unit (LAN port) by using a RJ45 cable.

3Second Mesh unit
Wait a few minutes for both mesh units to detect the Internet configuration. Once the LEDs are blue on both devices, they are configured.

How do I use the Atria Mesh App?
1Atria Mesh App
Then download the Atria Mesh app.

2Connect to the Wi-Fi
To do so, connect to the Wi-Fi of the Mesh device that is connected to your router/modem.

3Credentials
Enter the username and password (admin/admin) to connect.

4Main page
Now you are on the main page.
- Add a New Node: Where you can add a new Mesh unit to your Mesh Network.
- Attached Devices: Where you can check which devices are connected to your Mesh Network.
- My Network: Where you can check all the Mesh units connected to your Mesh Network.
- Wi-Fi Settings: Where you can edit and modify the SSID (Wi-Fi Network Name) and Password of your Wi-Fi Mesh Network.
- Guest Wi-Fi: Where you can set-up and configure a 2.4GHz or a 5GHz Guest Wi-Fi.
- Wi-Fi Schedule: Where you can schedule a time period activation for your Wi-Fi Network.
- LED Control: Where you can turn ON or OFF the LEDs of your Mesh unit.
- LAN Settings: Where you can enable or disable a DHCP.
- Internet Settings: Where you can configure a DHCP Connection, a manual DNS, a PPPoE and setup a Static IP.
- System Settings: Where you can modify the Administration User name and Password to access the App.

How many Mesh units can I use in a Mesh network?
You can use up to 6 Mesh units simultaneously in your Mesh network.
The main one connected to your internet box and the 5 others paired via WPS to the main Mesh unit.
Warning: For a maximum coverage put the mesh units in the rooms where the Wi-Fi signal is low or
where there is no coverage.
Please refer to How should I organize my Mesh Network to optimize my Wi-Fi network? to have a proper installation.
How many Wi-Fi networks are provided with my Mesh unit?
Your Mesh network only has one main Wi-Fi network once the mesh agents and controller are paired together.
If you need to have additional Wi-Fi networks, you can configure Guest Wi-Fi networks.
For the mesh 2100, you can configure two guest networks, one for the 2.4G band and one for 5G band.
Please refer to the following procedure : Can I configure a Guest Network for my Mesh network?
How should I organize my Mesh Network to optimize my Wi-Fi network?
To optimize you coverage you should install the mesh in the location where you have coverage issues in order to cover the widest area possible in your home.
Please make sure that the mesh units are not located in a room where there is a load bearing wall, as the wall is thicker the Wi-Fi signal can have issues getting through it.
1Unoptimized Mesh Installation
The following schema shows Wi-Fi coverage inside a house where mesh nodes are not located in the right area of the house to have a proper coverage.

2Optimized Mesh Installation
The following schema shows Wi-Fi coverage inside a house where mesh nodes are located in the right area of the house to have a proper coverage.

1Atria Mesh App
Download the application for smartphone 'ATRIA MESH' on the App Store or the Google Play Store.

2Connexion to the Wi-Fi
Connect to the Wi-Fi of your mesh unit.

3Credentials
Then you need to be connected to the Wi-Fi of the Mesh with your smartphone and then login to the app with your credentials that should be 'admin' and 'admin' if you have not changed it.

4My Network
Click My Network.

5Name of the Mesh
You will see the name of the mesh units you configured on your network.
Click on the name of the mesh unit to access its information.

6Name
Click on the name field.

7Change controller name
Enter a new name and click Save:
- The mesh controller should be named like this: MeshAX3000-Main- Nameoftheroom
- The mesh agents should be named like this: MeshAX3000-Nameoftheroom

Warning: If the mesh unit appears in grey it means that it is not providing enough coverage and that you should adjust its location to optimize the mesh network.
It takes too much time to have my Atria Mesh 2100 unit operational, is there something wrong?
After plug-in your first mesh unit and connecting it to the router it usually takes up to two minutes for the router to identify the WAN/LAN IP address and connect to it. Once the mesh unit is ready its LED will be blue.
Then, plug-in the second mesh unit in a different room, the LED will be red. You must press the WPS of the first mesh unit for 5 seconds and then the WPS button of the second mesh unit for 5 seconds. Wait for approximately one minute for the devices to pair. Once the devices are paired the LEDs are blue.
- If the pairing process does not work, please reset the two units to their factory settings by pressing the reset button of each unit. Please refer to the following FAQ to see how to reset your mesh network: How do I reset my Mesh units to the factory settings?
- If the LED is still red on the first mesh unit, please check that the RJ45 cable is connected to the right Ethernet port: WAN port (mesh unit).
- If you put the cable in one of the LAN ports the mesh unit will not be able to retrieve the information of the main internet network, so it will not be connected to the internet. Please refer to the following FAQ to see how to configure your mesh network: How do I configure my Wi-Fi mesh network