ATRIA Wi-Fi 5 Mesh System 2100 UK (3-pack)
All questions
ATRIA Wi-Fi 5 Mesh System 2100 UK (3-pack)
Credentials and Web UI access
Where can I find the credentials to access the Web UI?
1Credentials
The credentials to access the Web UI are located under your Mesh AX3000. By default the Username and Password for the Web UI are 'admin'.

To connect to the Web UI and change the administration password, please refer to : How do I access the Web UI?
If you changed the administration password and cannot access the Web UI, please reset your device to its factory settings by following this procedure: How do I reset my Mesh units to the factory settings?
How can I access the Web UI of the different Mesh units?
1Connexion to the Wi-Fi
To do so, enter the SSID (Wi-Fi Network Name) and Wi-Fi password of the router in your device:

2IP address of the Web UI on the browser
Then, enter the following IP address in your browser: 192.168.7.254 or type the following address : http://atria2100.mesh

3Credentials
You must enter the Username (admin) and Password (admin) (please note that after the first connection you will create your personal admin password which means that the password written on the product label will not work anymore).
Then, click Login.

4LAN Info
Click Status and LAN Info. Then in the connected device information look for the IP Address of the additional mesh units that are called Agent xxxx.

How do I access the Web UI?
To access the Web UI, you must be connected to the Wi-Fi of your device after connection the Mesh with the RJ45 cable.
1Connexion to the Wi-Fi
To do so, enter the SSID (Wi-Fi Network Name) and Wi-Fi password of the router in your device:

2IP address of the Web UI on the browser
Then, enter the following IP address in your browser: 192.168.7.254 or type the following address : http://atria2100.mesh

3Credentials
You must enter the Username (admin) and Password (admin) (please note that after the first connection you will create your personal admin password which means that the password written on the product label will not work anymore).
Then, click Login.

4Pop-up
Click Ok on the pop up message that appears.

5Main page
You are now on the main page of the Web UI.
You may need to change the administration password of the Web UI after your first connexion, to do so please refer to the following instructions.

6User Management
Click System and User Management.

7Change password
Enter the following information before clicking Confirm:
- Old Password: Enter the old administration password
- New Password: Enter a new password.
- Confirm Password: Enter the same password as in the previous step.

8Write down the new information
Write down the new password on a piece of paper and tape it under your router.

Warning: Please note that you need to enter a password between 8 and 32 characters containing uppercase, lowercase, number and at least one special character (@, $, !, %, *, ?, &)
How do I change the SSID (Wi-Fi Network name) and the password of my Wi-Fi mesh network ?
How do I change the SSID ( Wi-Fi Network name) and the password of my Wi-Fi mesh network ?
Warning: Please note that you need to enter a password between 8 and 32 characters containing
uppercase, lowercase, number and at least one special character (@, $, !, %, *, ?, &)
To connect to the Web U,I please refer to this procedure : How do I access the Web UI?
1CASE 1 : Changing the Wi-Fi network information in the Web UI
Click WLAN and WLAN 2.4G. Then, enter the following information before clicking Confirm:
- SSID: Enter a new network name
- PSK: Enter a new password.

2Write down the new information
Write down the new network information on a piece of paper.

I cannot access the Web UI, why?
There are several reasons why you cannot access the Web UI :
- The main Mesh unit is not connected to the Ethernet Network of your internet box via a RJ45 cable.
- Your device is not connect the Wi-Fi network of the mesh unit.
- You are not entering the right credentials, by default those are 'admin' and 'admin' for the Username and the Password. If you changed it and don't remember it, you can reset your Mesh unit to its default factory settings.
- Your device is not update and you need to reset it to its factory settings.
Please try to reinstall all your devices by referring to the following procedure : How do I configure my Wi-Fi mesh network?
If the devices are not working after following this procedure please reset them by referring to the following procedure : How do I reset my Mesh units to the factory settings?
I forgot the Wi-Fi password of my Mesh network, how I can find it?
1Default credentials
The default Wi-Fi password is located under your device, however, if you already changed it, you may need to restore the Mesh 2100 to its default factory settings.

CASE 1 : Viewing the Wi-Fi network information in the Web UI
To connect to the Web UI please refer to this procedure : How do I access the Web UI?
1WLAN
Click WLAN and WLAN2.4G. Then, click the eye icon next to the PSK field.

2Write down the new information
Write down the password on a piece of paper.

CASE 2 : Viewing the Wi-Fi network information in the App
To connect to the Web UI please refer to this procedure : How do I use the Atria Mesh App?
1Wi-Fi Settings
Then click Wi-Fi Settings.

2Password
Click the eye icon to display the password.

3Write down the new information
Write down the password on a piece of paper.

What can I do in the Web UI?
1Web UI
The Web UI is divided into 6 sections:
- Status: Where you can find all the informations about the Mesh device and Network.
- Network: where you can configure the WAN, the LAN settings (IPv4 / IPv6) and set up a Speed Limit.
- WLAN: where you choose between 2.4G and 5G network, set up multiples SSID, the WPS, manage the internet access of the different mac address, modify the SSID and Wi-Fi Passwords and set up a Mesh.
- Security: where you can set up a firewall, DoS Settings, URL/MAC filters, IP filters, parental/service control and Schedule the Mesh Network activation.
- Advanced: where you can configure the NAT settings (ALG, DMZ, Port Forwarding), a VPN, the SNTP (Time zone), a VPN, a Dynamic DNS and the UPnP.
- System: where you can change the login credentials, reboot the device, update the firmware, save and restore a backup, reset to factory settings, manage the LEDs, access the logs and launch diagnostics.

Where can I find the SSID (Wi-Fi Network Name) and Wi-Fi password of my Mesh Network?
1Find the information
You can find the information of each Wi-Fi networks of the mesh units on the label located under the product.
