LEDs, buttons and ports

I do not have access to the Internet and/or the LED of the "home" icon does not light up.

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip.

2Connect the adapters

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices, otherwise the adapter will automatically go into standby mode.

3Press the Connect & Secure button (first adapter)

Once the adapter is plugged in and connected to the Ethernet, simply press the “PAIR/RESET” button located on the right side of the device for 10 seconds.

4Press the Connect & Secure button (second adapter)

Press the “PAIR/RESET” button located on the right side of the second device for 10 seconds.

5Home LED blinks

The home icon LED should start blinking.

6Adapters are reset

All the LEDs must be green at the end of the operations.

Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 Mini on the same electrical installation.

After pairing all the devices, you can put them in the room where you need them.

Internet everywhere from any power socket!

The Powerline 1000 Mini Kit which includes two Powerline 1000 Mini adapters, creates a high-speed home network effortlessly by using your home’s existing electrical wiring at speeds up to 1000 Mbps. No new wire is required! Connect computers, consumer electronics and network compatible devices to the Internet in any room and any floor of your home by simply using a power outlet.

What do the icons and LEDs on the Powerline 1000 Mini mean?

This image shows the different statuses of the Powerline 1000 Mini EU LEDs.

Why do the Powerlines switch off on their own?

This is normal, the powerline 1000 Mini automatically switch to sleep mode if no activity is detected. When a signal is detected on the Ethernet port, the Powerline 1000 Mini will turn back on. It may take a few seconds for a Powerline 1000 Mini in standby mode to detect a new activity and turn back on.
The automatic power saving mode reduces your consumption up to 85%.