PLW1000SDUO

No items found.

No items found.

All questions

PLW1000SDUO

What should I do after the firmware update?

What should I do if the firmware update does not work?

How do I update the firmware?

Why should I update the firmware of my PLW1000SDUO?

Why is my 2.4GHz Wi-Fi experiencing interruptions, and how can changing the channel to 1, 6, or 11 help?

Why do the Powerlines switch off on their own?

What do the icons and LEDs on the Powerline mean?

The home icon LED is lit on the Wi-Fi adapter, but I cannot connect to the Wi-Fi network of the Powerline 1000.

The easiest solution for your IPTV connection!

The Internet speed is much lower at the output of the powerline network compared to the speed at the output of the Internet service provider's box. Why?

Internet everywhere from any power socket!

I receive Internet via fibre, is a Powerline 1000 suitable?

I do not have access to the Internet and/or the LED of the "home" icon does not light up

I cannot connect to the user interface via the URL: http://strong.500.ap or the IP address: 192.168.1.254

How to set up High Security Level 2 on your powerline products?

How to configure your powerline Wi-Fi network with High Security Level 1?

How to configure new powerline products with High Security Level 2 on your existing powerline Wi-Fi network?

How to choose the right high security level configuration for your powerline network?

How to add a new STRONG powerline product to your existing powerline Wi-Fi network with High Security Level 1?

How many Powerline 1000 can I connect to the same network?

How do I change the SSID name and password of the Powerline 1000 Wi-Fi network?

Expand your Powerline network to any room of your home by adding Powerline 1000 adapters!

Do not waste your power outlets! Use the extra noise filtered power socket!

Create a new Wi-Fi Hotspot at a speed up to 1200 Mbps in minutes by using your existing electrical wiring and any power socket!

Connect all your bandwidth hungry wired devices to the Internet using your existing electrical wiring!

Can I repeat the Wi-Fi network of the Internet box with the Powerline 1000 Wi-Fi?

Can I disable the Wi-Fi function of the Wi-Fi module so that it works as a simple Powerline?

Can I connect Powerlines of different brands and data rates to my network?

No items found.

No items found.

I do not have access to the Internet and/or the LED of the "home" icon does not light up

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip.

Both Powerline adapters plugged into a power strip

2Connect the adapters to the Internet

Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

Each adapter connected to a network device with an Ethernet cable

3Press the PAIR button (first adapter)

Once the adapter is plugged in and connected to the Ethernet, press the PAIR button on the right side of the device for 10 seconds.

Pressing the PAIR button on the first adapter for 10 seconds

4Press the PAIR button (second adapter)

Press the PAIR button located on the right side of the second device for 10 seconds.

Pressing the PAIR button on the second adapter for 10 seconds

5The home LEDs blink

The home LEDs should start blinking.

Home LEDs blinking on both adapters

6The adapters are reset

All the LEDs must be green at the end of the operation.

All LEDs green on both adapters after reset

Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.

Follow us