PLW600SDUOEU

No items found.

No items found.

All questions

PLW600SDUOEU

Why is my 2.4GHz Wi-Fi experiencing interruptions, and how can changing the channel to 1, 6, or 11 help?

Can I connect Powerlines with different brands and data rates to my network?

Can I disable the Wi-Fi function of the Wi-Fi module so that it works as a simple Powerline?

Can I repeat the Wi-Fi network of the Internet box with the Powerline 600 Wi-Fi?

Connect all your bandwidth hungry wired devices to the Internet using your existing electrical wiring!

Create a high-speed home network of up to 600 Mbps in the blink of an eye by using your existing electrical wiring!

Create a new Wi-Fi Hotspot at a speed up to 300 Mbps in minutes by using your existing electrical wiring and any power socket!

Do not waste your power outlets! Use the extra noise filtered power socket!

Expand your Powerline network to any room of your home by adding Powerline 600 adapters!

How do I change the SSID name and password of the Powerline 600 Wi-Fi network?

How many Powerline 600 can I connect to the same network?

How to add a new STRONG powerline product to your existing powerline Wi-Fi network with High Security Level 1?

How to choose the right high security level configuration for your powerline network?

How to set up High Security Level 2 on your powerline products?

I cannot connect to the user interface via the URL: http://strong.500.ap or the IP address: 192.168.1.254

I do not have access to the Internet and/or the LED of the "home" icon does not light up.

I receive Internet via fibre, is a Powerline 600 suitable?

Internet everywhere from any power socket!

The Internet speed is much lower at the output of the powerline network compared to the speed at the output of the Internet service provider's box. Why?

The easiest solution for your IPTV connection!

The home icon LED is lit on the Wi-Fi adapter, but I cannot connect to the Wi-Fi network of the Powerline 600.

What do the icons and LEDs on the Powerline mean?

How to configure new powerline products with High Security Level 2 on your existing powerline Wi-Fi network?

How to configure your powerline Wi-Fi network with High Security Level 1?

Why do the Powerlines switch off on their own?

No items found.

No items found.

I do not have access to the Internet and/or the LED of the "home" icon does not light up.

1Connect the adapters to a power strip

Connect the adapters one after the other to a power strip.

Both Powerline adapters plugged into a power strip

2Connect the adapters to the Internet

Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

Each adapter connected to a network device with an Ethernet cable

3Press the Connect & Secure button (first device)

Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the front panel for 10 seconds.

Pressing the button on the first adapter for 10 seconds

4Press the Connect & Secure button (second device)

Press the Connect & Secure button on the front panel of the second device for 10 seconds.

Pressing the button on the second adapter for 10 seconds

5The home LEDs blink

The home LEDs should start blinking.

Home LEDs blinking on both adapters

6The devices are reset

All the LEDs must be green at the end of the operation.

All LEDs green on both adapters after reset

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.

Follow us