Powerline 600 Duo Wi-Fi Mini
Tutte le domande
Powerline 600 Duo Wi-Fi Mini
Non ho accesso a Internet e/o il LED dell'icona "home" non si accende.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1. Collegaregli adattatori a una ciabatta
Connect the adapters one after the other to a power strip.
2. Collegaregli adattatori a Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Premereil pulsante "Connect & Secure" (primo adattatore)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the right side of the device for 15 seconds.
4Premereil pulsante "Connect & Secure" (secondo adattatore)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5.La spia LED "Home" lampeggia
The home LEDs should start blinking.
6Devices are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.