PLW600MDUO

Ingen gjenstander funnet.
Ingen gjenstander funnet.

Alle spørsmål

PLW600MDUO

Ingen gjenstander funnet.
Ingen gjenstander funnet.

Jeg har ikke tilgang til internett og/eller LED-lampen på «hjem»-ikonet lyser ikke.

Du må tilbakestille adapterne til fabrikkinnstillingene. Følg trinnene nedenfor for å tilbakestille adapterne.

1Plug the adapters into a power strip

Koble adapterne etter hverandre til en strømskinne.

Both Powerline adapters plugged into a power strip

2 Koble adapterne til Internett

Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

Each adapter connected to a network device with an Ethernet cable

3 Trykk på Koble til og sikre-knappen (første adapter)

Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

Pressing the button on the first adapter for 15 seconds

4 Trykk på Koble til og sikre-knappen (andre adapter)

Press the Connect & Secure button on the right side of the second device for 15 seconds.

Pressing the button on the second adapter for 15 seconds

5The home LEDs blink

Hjemme-LED-lampene skal begynne å blinke.

Home LEDs blinking on both adapters

6The devices are reset

All the LEDs must be green at the end of the operation.

All LEDs green on both adapters after reset

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.

Følg oss
4 års garantiansvarsfraskrivelseMerknad om datalovenGenerell produktsikkerhetsforordning (GPSR) og batteribrukSikkerhetslagring whitelistPSTI-samsvarRetningslinjer for avsløring av sårbarheterRetningslinjer for konfidensialitet og personvernJuridisk merknad og generelle vilkår for bruk