PLW600MDUO

Inga föremål hittades.
Inga föremål hittades.

Alla frågor

PLW600MDUO

Inga föremål hittades.
Inga föremål hittades.

Jag har inte tillgång till internet och/eller så lyser inte LED-lampan på ”hem”-ikonen.

Du måste återställa adaptrarna till fabriksinställningarna. Följ stegen nedan för att återställa adaptrarna.

1Plug the adapters into a power strip

Anslut adaptrarna en efter en till ett grenuttag.

Both Powerline adapters plugged into a power strip

2. Anslutadaptrarna till internet

Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

Each adapter connected to a network device with an Ethernet cable

3Tryckpå knappen ”Connect & Secure” (första adaptern)

Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

Pressing the button on the first adapter for 15 seconds

4Tryck påknappen ”Connect & Secure” (den andra adaptern)

Press the Connect & Secure button on the right side of the second device for 15 seconds.

Pressing the button on the second adapter for 15 seconds

5The home LEDs blink

LED-lamporna i hemmet bör börja blinka.

Home LEDs blinking on both adapters

6The devices are reset

All the LEDs must be green at the end of the operation.

All LEDs green on both adapters after reset

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.

Följ oss
4 års garanti AnsvarsfriskrivningMeddelande enligt datalagenAllmän produktsäkerhetsbestämmelse (GPSR) & batterianvändningwhitelist för säkerhetslagringÖverensstämmelse med PSTIPolicy för avslöjande av sårbarheterSekretess- och integritetspolicyJuridiskt meddelande och allmänna användarvillkor