PLW600MDUO
Усі питання
PLW600MDUO
У мене немає доступу до Інтернету та/або світлодіод на піктограмі «Домашня сторінка» не світиться.
Необхідно скинути налаштування адаптерів до заводських. Щоб скинути налаштування адаптерів, виконайте наведені нижче дії.
1Plug the adapters into a power strip
Підключіть адаптери по черзі до розгалужувача.

2. Підключітьадаптери до Інтернету
Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

3. Натиснітькнопку «Підключити та захистити» (перший адаптер)
Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

4. Натиснітькнопку «Connect & Secure» (другий адаптер)
Press the Connect & Secure button on the right side of the second device for 15 seconds.

5The home LEDs blink
Домашні світлодіоди повинні почати блимати.

6The devices are reset
All the LEDs must be green at the end of the operation.

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.