PLW600MDUO
Todas las preguntas
PLW600MDUO
¿Cómo configurar los nuevos productos « powerline » con el nivel de seguridad 2 en tu red « powerline » actual?
If you want to add more than one new powerline product, each product must be configured one after the other by following the same process, not simultaneously. Typically, powerline adapters are paired in sets of two, so if you need to add new powerline products to your network that is configured with High Security Level 2, follow the steps below.
1Plug in the new adapter
Plug the additional device(s) into a power socket.
2. Conectael nuevo dispositivo a Internet
Connect the device to an Internet router/gateway with an RJ45 cable.
3. Pulsael botón «Conectar y proteger» (dispositivo ya existente)
Press the Connect & Secure button on one of the existing devices of the network for two seconds.
4. Pulsael botón «Conectar y proteger» (nuevo dispositivo)
Then, press the Connect & Secure button on the new device for two seconds to add it to the network. You have up to two minutes to press the button.
5The home LED blinks
The home LED should start blinking.
6The LEDs are green
Una vez añadido el nuevo dispositivo, los LED de «Inicio» deberían estar en verde en ambos dispositivos.
7. Se ha configurado la clave de cifrado
Tu nueva clave de cifrado única ya está configurada en el dispositivo que acabas de configurar.
