5G+ AIRHOME 1950 | Wi-Fi 7 (7.2 Gbps)
No items found.
No items found.
All questions
No items found.
No items found.
Wi-Fi and network troubleshooting
How do I access my devices remotely from the Internet? (DDNS / WAN access)
Dynamic DNS (DDNS): go to Advanced > DDNS > Add. Select your provider (noip.com, dyndns.org, etc.), enter your domain name, WAN interface, and account credentials. Combine with Port Forwarding to reach specific services.
Warning: Remote access exposes your devices to the Internet. Use strong passwords and only enable when strictly necessary.
My Wi-Fi is slow / Devices stay on 2.4 GHz / How do I enable MLO?
- Enable MLO: Wi-Fi > Wi-Fi Basic Settings > Wi-Fi Band Aggregation (MLO) > Enable. Requires Band Steering to also be Enabled.
- For MLO to function, both bands must use 802.11be mode: check Wi-Fi > Wi-Fi Advanced Settings and set 802.11 Mode to 802.11b/g/n/ax/be (2.4 GHz) and 802.11a/n/ac/ax/be (5 GHz).
- Set Channel Width 5 GHz to 160 MHz in Wi-Fi Advanced Settings for maximum throughput.
Warning: MLO requires a Wi-Fi 7 (IEEE 802.11be) compatible client device. Wi-Fi 5 and Wi-Fi 6 devices connect normally on the appropriate band without MLO.
My Wi-Fi network does not appear in the device list
- Go to Wi-Fi > Wi-Fi Basic Settings and check that the Status field for both bands is set to Enable.
- Check that Broadcast SSID is set to Enable. If set to Disable, the network is hidden — devices must connect by entering the SSID manually.
- If settings are correct, restart the router via Management > Reboot & Reset > Reboot.