Credentials and Web UI access

How do I access the Web UI?

To access the Web UI, you must be connected to the Wi-Fi of your device after positioning the SIM card in the slot.

1Connect to the router Wi-Fi network

To do so, enter the SSID and password of the router in your device.

2Browse to the Web UI IP Address

Then, enter the following IP address in your browser: 192.168.0.1

3Access the Login page

Once you have browsed to the IP Address, click login.

4Enter your credentials

You must enter the username and password.

After connecting for the first time, we strongly advise you to change the administrator password to secure the access to the router and prevent hacking.

How do I change the SSID (Wi-Fi Network Name) and password? (Case 1: Quick Settings)

In the Web UI, you have two ways to change the SSID and password of your router:
• By using the Quick Settings
• Or by using Wi-Fi Settings

1Quick Settings

In the Web UI, the Quick Settings enable you to change the information of your network: its SSID and password.

To do so, click Quick Settings in the top bar.

2Enter the new network name

Then enter your new network name and click Next.

3Display the Wi-Fi Password

Click Display Password.

4Enter the new password

Change your password. Then click Next.

5Save the new network information

To save the changes click Apply.

6Write down the new network information

Write your new SSID and password on a paper and tape it to the router.

How do I change the SSID (Wi-Fi Network Name) and password? (Case 2: Wi-Fi Settings)

How do I change the SSID (Wi-Fi Network Name) and password? (Case 1: Quick Settings)

In the Web UI, you have two ways to change the SSID and password of your router:
• By using the Quick Settings
• Or by using Wi-Fi Settings.

1Connect to the router Wi-Fi network

To change the SSID and password, you must connect to the Wi-Fi of your device. And connect to the Web UI by following this procedure:

1. How do I access the Web UI?

2Wi-Fi Settings

Click Device Settings and select Wi-Fi Settings.

3SSID Settings

Then select SSID Settings.

4Enter your new network information

Change the name entered in the Network Name (SSID) field and check the Display Password box. Then change the password entered in the Pass Phrase field.

5Save the new network information

Click Apply to save the changes.

6Write down the new network information

Write your new SSID and password on a paper and tape it to the router.

How do I change the admin password and username?

1Access the Web UI

To connect to the Web UI, please follow the guidelines written in:

1. How do I access the Web UI?

2System Settings

Once this is done, click the System Settings tab and select System Setting.

3Enter the new information

Click Modify Password and enter the following information:
• Current Password: Enter the current password.
• New Username: Enter the new username.
• New Password: Enter the new password.
• Confirm New Password: Enter the same password as in the previous field.

4Save the information

Click Apply.

What can I do in the Web UI?

The Web UI is divided into 5 sections:

• Home: where you can see the main information regarding your router which corresponds to the status of the internet connection, the firmware version, the IP address, information about the Wi-Fi network and Home Network, and so on...
• Quick Settings: where you can edit your SSID and password.
• Device Settings: where you can see the number of connected devices, manage IP Address settings, PIN codes, Antenna settings, Wi-Fi settings, Internet Settings, etc.
• Firewall: where you can set up security parameters.
• System settings: where you can update, reboot, or edit your settings.
In addition, you can also see the status of the Wi-Fi network, Mobile Network, and data.

Where are the password and SSID (Wi-Fi Network Name) written?

To find the password of your device, you can look at the back of the device, the information will be written.

Why is it written Limited Service in the Web UI?

There are several reasons why, the Limited-Service text is written next to the Network and Web icon.

1. The main reason can be that your SIM card is protected by a PIN code that needs to be entered in the device Web UI to activate the network.
2. Another reason can be that the SIM card is not inserted properly and is not detected by the device.
3. It is also possible that your SIM card is detected but not automatically recognized by the device. In this case, you must connect to the Web UI and check the APN settings of your service provider. This procedure is explained in the following section: How do I check and edit the APN settings of my service provider?

Why is there a QR Code on the rear side of the router?

Good news, every router is sold with a sticker that contains the Wi-Fi network information such as the Wi-Fi name and its password. You may have noticed a QR Code next to it. This QR Code is designed to simplify your connection to the Wi-Fi. Indeed, if you open your smartphone and scan the QR Code you will be automatically connected to the Wi-Fi of your device.