Settings and features

How do I activate the WPS?

To activate the WPS, press the button located on the front of your repeater for approximately 2 seconds (until the WPS LED is flashing).

How do I connect to the WPS?

WARNING: You can use the WPS function to set up the Wi-Fi connection between your repeater and your internet box/router.

1Activate WPS on the Repeater

To activate the WPS, press the button located on the front of your repeater:

• If you want to connect your computer by using the WPS, press the WPS button for 2 seconds
• If you want to connect you router or Access Point, press the WPS button for 8 seconds.

2Enable WPS on Your Router

Press the WPS of your Internet box/router so that the repeater connects to it. Usually, the WPS button is indicated by two arrows.

How do I set a static IP for my repeater?

1Connect to the Repeater

You need to connect to the repeater by RJ45 or to connect to one of the Wi-Fi networks that was created after the configuration.

2Access the Web UI

Enter the URL to access the web UI in your browser

3Log In to the Web Interface

Enter your administration credentials.

4Open the Setup Menu

Click Setup.

5Go to Internet Settings

Click InternetSettings

6Configure the Static IP Address

In the Internet Settings page, enter the following information before clicking Save & Apply:

• • WAN Type: Select the Static IP value in the list.
  • IP Address: Enter the IP Address for the repeater.
  • Subnet Mask: Select the subnet mask in the list
  • Gateway: Enter the IP Address of your repeater
  • DNS1: Enter a DNS address.
  • DNS2: Enter a DNS address.

I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater

It is not possible to extend two Wi-Fi Network. You can extend either your Guest Network or your main Wi-Fi Network.

Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?

No. Wi-Fi devices that are connected to the repeater communicate to your modem/router by using the MAC addresses of the repeater.