PLW600MDUO
All questions
PLW600MDUO
How to configure new powerline products with High Security Level 2 on your existing powerline network?
If you want to add more than one new powerline product, each product must be configured one after the other by following the same process, not simultaneously. Typically, powerline adapters are paired in sets of two, so if you need to add new powerline products to your network that is configured with High Security Level 2, follow the steps below.
1Plug in the new adapter
Plug the additional device(s) into a power socket.
2Connect the new device to the Internet
Connect the device to an Internet router/gateway with an RJ45 cable.
3Press the Connect & Secure button (existing device)
Press the Connect & Secure button on one of the existing devices of the network for two seconds.
4Press the Connect & Secure button (new device)
Then, press the Connect & Secure button on the new device for two seconds to add it to the network. You have up to two minutes to press the button.
5The home LED blinks
The home LED should start blinking.
6The LEDs are green
After adding the new device, the home LEDs should be green on both devices.
7The encryption key is set
Your new unique encryption key is set on the device you just configured.
