Nema pronađenih stavki.

Nema pronađenih stavki.

DOVY BATERIJA ZA BEBE

Sva pitanja

Nema pronađenih stavki.

Nema pronađenih stavki.

DOVY BATERIJA ZA BEBE

Kako prvi put postaviti kameru?

Uparivanje ne uspijeva / 'Uspješna veza' se nikad ne pojavljuje

Što znače boje LED dioda?

Kako spojiti kameru na novu Wi-Fi mrežu?

I receive no notifications (motion, crying, temperature alerts)

The intercom does not work / No audio from the camera

The live view is slow, freezing, or shows a black screen

'SD card not detected' / Lullabies are unavailable

How does video recording work? What happens when the card is full?

Battery is draining quickly / How do I get the best battery life?

The image is dark at night / Night vision mode explained

Crying detection is not triggering / Temperature is not displayed

The camera is showing as offline / How do I reset it?

How do I share camera access? / Privacy settings

Crying detection is not triggering / Temperature is not displayed

Crying Detection not working: go to Settings (⚙) > Sound Settings and verify that the Microphone is enabled. Then go to Alarm Management > Crying Detection and check it is active with an appropriate sensitivity. Remember: Crying Detection sends a silent push notification only.

Temperature not displayed: the temperature sensor needs 30–60 seconds to initialise after startup. Wait and refresh the Live view. If the value still does not appear, check that the camera is online (solid blue LED).

Tips: To set temperature and humidity alerts: Settings (⚙) > Temperature and Humidity Settings > enable the alarm switch. Recommended range for a baby's room: 16–20°C, 40–60% RH.

Pratite nas