PLW600MDUO
Sva pitanja
PLW600MDUO
Kako konfigurirati nove elektroenergetske proizvode s visokom razinom sigurnosti 2 na vašoj postojećoj elektroenergetskoj mreži?
If you want to add more than one new powerline product, each product must be configured one after the other by following the same process, not simultaneously. Typically, powerline adapters are paired in sets of two, so if you need to add new powerline products to your network that is configured with High Security Level 2, follow the steps below.
1Plug in the new adapter
Plug the additional device(s) into a power socket.
2. Spojite novi uređaj na internet
Connect the device to an Internet router/gateway with an RJ45 cable.
3 Pritisnite gumb Poveži se i osiguraj (postojeći uređaj)
Press the Connect & Secure button on one of the existing devices of the network for two seconds.
4 Pritisnite gumb Poveži i osiguraj (novi uređaj)
Then, press the Connect & Secure button on the new device for two seconds to add it to the network. You have up to two minutes to press the button.
5The home LED blinks
The home LED should start blinking.
6The LEDs are green
Nakon dodavanja novog uređaja, kućne LED diode trebale bi svijetliti zeleno na oba uređaja.
7 Ključ za šifriranje je postavljen
Vaš novi jedinstveni ključ za šifriranje postavljen je na uređaju koji ste upravo konfigurirali.
