PLW600MDUO
Minden kérdés
PLW600MDUO
Hogyan állítsuk be a magas biztonsági szintű (2. szint) új Powerline-termékeket a meglévő Powerline-hálózatunkon?
If you want to add more than one new powerline product, each product must be configured one after the other by following the same process, not simultaneously. Typically, powerline adapters are paired in sets of two, so if you need to add new powerline products to your network that is configured with High Security Level 2, follow the steps below.
1Plug in the new adapter
Plug the additional device(s) into a power socket.

2. Csatlakoztassaaz új eszközt az internethez
Connect the device to an Internet router/gateway with an RJ45 cable.

3. Nyomja mega „Csatlakozás és biztonság” gombot (meglévő eszköz)
Press the Connect & Secure button on one of the existing devices of the network for two seconds.

4. Nyomja mega „Csatlakozás és biztonság” gombot (új eszköz)
Then, press the Connect & Secure button on the new device for two seconds to add it to the network. You have up to two minutes to press the button.

5The home LED blinks
The home LED should start blinking.

6The LEDs are green
Az új eszköz hozzáadása után mindkét eszközön zöldnek kell világítania az otthoni LED-eknek.

7Atitkosítási kulcs be van állítva
Az új, egyedi titkosítási kulcs be van állítva az imént konfigurált eszközön.
