PLW600MDUO
Minden kérdés
PLW600MDUO
Nincs internet-hozzáférésem, és/vagy a „home” ikon LED-je nem világít.
Az adaptereket vissza kell állítania a gyári beállításokra. Az adapterek visszaállításához kövesse az alábbi lépéseket.
1Plug the adapters into a power strip
Csatlakoztassa az adaptereket egymás után egy többaljzatos elosztóhoz.

2. Csatlakoztassaaz adaptereket az internethez
Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

3. Nyomja mega „Connect & Secure” gombot (az első adapteren)
Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

4. Nyomja mega „Connect & Secure” gombot (második adapter)
Press the Connect & Secure button on the right side of the second device for 15 seconds.

5The home LEDs blink
A házon lévő LED-ek villogni kezdenek.

6The devices are reset
All the LEDs must be green at the end of the operation.

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.