Reset, reboot and firmware update

How do I reboot my repeater?

1Connect your repeater Wi-Fi Network

You need to connect to the repeater by RJ45 or to connect to one of the Wi-Fi networks that was created after the configuration.

.

2Browse to the Web UI URL

Type the URL in your browser.

3Login Page

Enter your admin password and click Login.

4Reboot

Click Reboot.

How do I reset my repeater to its factory settings? (Reset Button)

Press the reset button located on the left side of the repeater until the LEDs are off. The device will turn back on automatically once it is reset.

How do I reset my repeater to its factory settings? (Web UI)

1Connect your repeater with a RJ45 cable

You need to connect to the repeater by RJ45 or to connect to one of the Wi-Fi networks that was created after the configuration.

2Browse to the Web UI URL

Type the URL in your browser.

3Login Page

Enter your admin password and click Login.

4Reset to facotry settings

Click Save/Reload Settings.

5Load Default

Click Load Default.

How do I update the firmware of my repeater?

1Browse to the download section on https://www.strong-eu.com/

Before the update, you must go to the download section of our website to see if there is a new software version available.

2Download

To access the downloads, Click Assistance and Download in the top bar and its submenu.

3Select your product reference

Once, you have browsed to the Downloads page, click Home Networking and repeater and click the product reference.

4Firmware Section

On the page below, you will find the new software version under the firmware section.

If you do not see a firmware section on the download page, it means that there is no new software version available.

5Connect to the Web UI

Follow this procedure to connect to the Web UI.

6Upgrade Firmware

Click Upgrade Firmware.

7Select the firmware file

Select your file and click Upload, the update will start automatically.

Warning: Please wait for the update to be completed and for the device to restart. You must reconnect to the Wi-Fi after the update.