5G AIRHOME 1050 | Wi-Fi 6

When your SIM card is not automatically recognized by the device you must login the Web UI to check the APN settings and edit them, if necessary. The APN settings of your service provider can befound directly on its website, or you can request them to the support service of your service provider.

1. Maak verbindingmet het wifi-netwerk van je router

You must connect to the Web UI. To do so, enter the SSID (Wi-Fi Network Name) and Wi-Fi password of the router in your device:

2. Ganaar het IP-adres van de webinterface

Voer vervolgens het volgende IP-adres in je browser in: 192.168.0.1

3. Inlogpagina

You must enter the Username and Password. Then, click Login. For more information about the Logins please refer to the login procedure.

4APN Configuration

Click Network in the top bar, then on the Mobile Network section and select the APN Configuration section.

5Verify informations

Check the following information:

Status

Profile Name

APN

Authentication

PDP Type

6Check your provider's APN Settings

Look for the APN settings on your service provider’s website. You need to write down the following information:

Name
APN
Username
Password
Authentication Type

7Add a New APN

If the information is incorrect, click the Add toggle and enter the following information before Save & Apply:

Authentication Type: Select NONE, CHAP, PAP, or PAP&CHAP
Profile Name: Enter the name of your service provider (Limited to 14 characters including spaces).
APN: Enter the APN address.
PDP Type, select the APN Type: IPv4, IPv6 or IPv4&IPv6.
Check the Statut box.

You can reset your APN Configuration with the Set Default option, Edit an existent one and delete a configuration with the corresponding options.

Volg ons